Filter
Top Products
HP E1459A SCPI Command Reference 71
Command Quick Reference
Command Subsystem Description See Also
DIAG:SYSR:STAT?
:ENAB <
state
>
:ENAB?
Returns the value of the Watchdog Timer state (1=asserted, 0=not asserted).
Turns the Watchdog Timer ON or OFF.
Returns the enabled state of the Watchdog Timer as either a +1, or +0.
page 41
page 41
page 42
DISP:MON:PORT <port>
:MON:PORT? [MIN | MAX | DEF]
:MON:PORT:AUTO <
state
>
:MON:PORT:AUTO?
:MON[:STAT] <
state
>
:MON[:STAT]?
Sets display monitor port (channel) or automatic mode.
Returns the port (channel) number of the current display.
Sets the automatic mode for the Display Monitor on or off.
Returns the state of the automatic display mode; either +0 or +1.
Turns the Display mode on or off.
Returns the value of the Display Monitor State; +0 (OFF) or +1 (ON).
page 43
page 44
page 44
page 44
page 45
page 45
INP
n
:CLOC[:SOUR] EXT | INT
:CLOC[:SOUR]?
:DEB:TIM <
time
> |MIN | MAX | DEF
:DEB:TIM? [MIN | MAX | DEF]
Specifies the input circuitry clock source for Port
n
.
Returns the programmed value of the input clock source for Port
n
.
Programs the channel input debounce time for Port
n
.
Returns the current debounce time as a floating point number.
page 46
page 47
page 47
page 48
MEAS:DIG:DATA
n
[:
type
][:VAL]?
:DIG:DATA
n
[:
type
]:BIT
m
?
Returns contents of Current Value Register(s) for the specified Port
n
.
Returns value of BIT
m
of Channel Data Register for specified Port
n
.
page 49
page 50
MEM:DEL:MACR <
name
> Deletes the MACRO command defined by the name <
name
>. page 51
[SENS:]EVEN:PORT
n
:DAV?
:PORT
n
:DAV:ENAB <
state
>
:PORT
n
:DAV:ENAB?
:PORT
n
:EDGE?
:PORT
n
:EDGE:ENAB <
state
>
:PORT
n
:EDGE:ENAB?
:PORT
n
:NEDG?
:PORT
n
:NEDG:ENAB <
mask
>
:PORT
n
:NEDG:ENAB?
:PORT
n
:PEDG?
:PORT
n
:PEDG:ENAB <
mask
>
:PORT
n
:PEDG:ENAB?
:PSUM:DAV?
:PSUM:EDGE?
Returns status of DAVailable Event for Port
n
as either +0 or +1.
Enables Data Available interrupt into Port
n
by EXT clock source.
Returns state of DAVailable Event Enable for Port
n
as either +0 or +1.
Returns status of Edge Detect Event for Port
n
as either +0 or +1.
Enables / disables an edge event interrupt for Port
n
.
Returns state of the Edge Event Enable for Port
n
as a signed integer.
Returns value of Negative Edge Detect Register for 16 bits of Port
n
.
Sets the Negative Edge Detection Mask for Port
n
.
Returns value of Negative Edge Detection Mask as a 16 bit integer.
Returns value of Positive Edge Detect Register for 16 bits of Port
n
.
Sets the Positive Edge Detection Mask for Port
n
.
Returns value of the Positive Edge Detection Mask as a 16 bit integer.
Returns status of DAVailable Event for ALL ports as a 16 bit integer.
Returns the status of the edge events for ALL ports.
page 52
page 53
page 53
page 54
page 54
page 55
page 55
page 56
page 56
page 57
page 57
page 58
page 58
page 59
STAT:OPER:COND?
:OPER:ENAB <
mask
>
:OPER:ENAB?
:OPER[:EVEN]?
:OPER:PSUM:COND?
:OPER:PSUM:ENAB <
mask
>
:OPER:PSUM:ENAB?
:OPER:PSUM[:EVEN]?
:PRES
:QUES:COND?
:QUES:ENAB <
mask
>
:QUES:ENAB?
:QUES[:EVEN]?
Returns value of Operation Status Condition Register as 16 bit int.
Sets the value of the OPERation Status Enable Register.
Returns value of OPERation Status Enable Register as 16 bit integer.
Returns value of OPERation Status Event Register as 16 bit integer.
Returns value of OPERation Status Port Condition Register as 16 bit int.
Sets the value of the OPERation Status Port Enable Register.
Returns value of Operation Status Port Enable Register as 16 bit integer.
Returns value of Operation Status Port Event Register as 16 bit integer.
Presets the Status system registers and conditions.
Returns value of Questionable Status Condition Register as 16 bit int.
Sets the value of the QUEStionable Status Enable Register.
Returns value of QUEStionable Status Enable Register as 16 bit integer.
Returns value of QUEStionable Status Event Register as 16 bit integer.
page 62
page 62
page 63
page 63
page 63
page 64
page 64
page 65
page 65
page 66
page 66
page 67
page 67
SYST:CDES? <
number
>
:CTYP? <
numbe
r>
:ERR?
:VERS?
Returns the module description.
Returns the module card type.
Queries the error register for error value and string to identify the error.
Returns the SCPI version to which this module complies.
page 68
page 68
page 69
page 69