Filter
Top Products
Table 2-1 Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT
Workstations (continued)
Heading Option Description
NOTE: If you turn off power to the computer using a power strip, you
cannot use the suspend/sleep feature or the Remote Management
features.
●
POST Delay (None (default), 5, 10, 15, 20 seconds)—Delays start of the
POST process. You might need a delay to:
◦
Allow time for some hard disk drives to spin up before POST is finished.
◦
Give yourself more time to select F10 to enter the Computer Setup (F10)
Utility.
●
Remote Wakeup Boot Source (Local Hard Drive/Remote Server). Sets the boot
device for the workstation when it is started using Remote Wakeup (takes
precedence over the Boot Order menu setting).
●
Bypass F1 Prompt on Confirmation Changes (Enabled/Disabled)—Prevents
display of a confirmation prompt when you make changes to the system.
BIOS Power-On Lets you disable or specify a weekday and time for BIOS power-on.
Onboard Devices Lets you disable or set resources (IRQ, DMA, I/O Range) for onboard system
devices such as the serial port and parallel ports. Operating system parameters
generally override Onboard Devices settings.
Bus options Enable/disable these options:
●
PCI SERR# Generation (Enabled/Disabled)—Controls PCI SERR# generation
for ill-behaved PCI add-in cards (that can generate SERR# spuriously).
●
PCI VGA Palette Snooping (Disabled/Enabled)—Controls PCI VGA Palette
Snooping for compatibility purposes.
●
PCI Latency Timer (32/64/96/128/160/192/224/248). 128 PCI Clocks is
the default.
Device Options Enable/disable the following device options:
●
S5 Wake-on-LAN (Enabled/Disabled)
●
Printer Mode (EPP+ECP, Output Only, Bi-Directional)
●
Num Lock State at Power-On (On/Off)
● Integrated Video
1
(Enabled/Disabled)
●
IGD (Integrated Graphics Device) Memory—Displayed when Integrated Video
is Enabled. Sets the maximum amount of system memory that can be allocated
as graphics memory (32, 64 (default), 128, 256, 512 MB)
1
●
Internal Speaker (Enabled/Disabled)
●
NIC Option ROM
2
Download (PXE/Disabled)
●
SATA RAID Option ROM
2
Download (Enabled/EFI/Disabled)
●
UEFI Option ROM Support (Enabled/Disabled)
●
Multi-Processor (Enabled/Disabled)
● Hyperthreading
1
(Disabled/Enabled)
50 Chapter 2 System management