Filter
Top Products
3-2 HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference
Operating the HP Surestore FC 1Gb/2Gb Switch 16B
3
• 16 port speed LEDs on the SFP media side (above and to the right of each port) to indicate the
current link speed of each port.
• One switch power LED below the serial port on the SFP media side, to indicate whether the
switch is on and has successfully booted.
• Two power supply LEDs on the power supply side (one on each power supply) to indicate the
status of each power supply.
• One switch status LED in the center of the power supply side to indicate whether the switch is
on and has successfully booted, and whether any of the ports are faulty.
LEDs On the SFP Media Side
Figure 3-1 shows the SFP media side of the FC 16B with the LEDs identified.
Figure 3-1 The SFP media side of the FC 16B
Table 3-1 describes the LEDs on the SFP media side of the switch.
Switch Power LED
Serial Port
Port Status LED (16x)
Optical Port (16x)
Port Speed LED (16x)
Ethernet Port