HP (Hewlett-Packard) FC 1GB/2GB SWITCH 16B Switch User Manual


 
A-2 HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference
Product Specifications
A
Two fan trays, each containing two fans. Air is pulled in through the rear intake and pushed out
through the vents in the SFP media side. The fans provide adequate cooling for the maximum
switch power rating of 102 Watts.
Three digital thermometers, capable of sensing a temperature range from -55 °C to +125°C, in
0.5°C increments.
A motherboard that is completely enclosed in an EMI (electromagnetic interference) enclosure
tray. The logic and chassis ground are connected to the chassis by screws. The embedded
processor can process frames up to 1024 bytes.
A real-time clock (RTC) with a 10-year, non-customer replaceable, battery and 56 bytes of
NVRAM.
Weight and Physical Dimensions
The dimensions of the FC 16B are listed in the following table.
Facility Requirements
To ensure correct operation of the switch, the facility where the switch is in use must meet the
following requirements:
Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the
switch nameplate.
An air flow of at least 300 cubic feet per minute, available in the immediate vicinity of the
switch.
The power specifications listed in Table A-2 on page A-3.
The environmental specifications listed in Table A-3 on page A-3.
The electrical interference must be less than the levels stated in the standards listed in
Table A-4, under “Immunity” (on page A-5).
If the switch will be installed in an EIA rack:
All equipment installed in the rack should have a reliable branch circuit ground
connection, and should not rely on a connection to a branch circuit, such as a power strip.
The rack should be balanced and the installed equipment within the rack’s weight limits.
Ensure the rack is mechanically secured to insure stability in the event of an earthquake.
Table A-1 Physical Specifications
Dimension Value
Height 1U
Depth 24 inches (61.0 cm)
Width 17 inches (43.2 cm)
Weight (with both power
supplies installed)
28.5 lbs (12.9 kg)