HP (Hewlett-Packard) FC 1GB/2GB SWITCH 16B Switch User Manual


 
A-4 HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference
Product Specifications
A
General Specifications
The FC 16B supports F_Port, FL_Port, and E_Port connections and DNS (Distributed Name
Server). It is EMC (Electromagnetic Compatibility) compliant.
The following table lists the general specifications for the FC 16B.
Shock
(operating) 4G, 11MS duration, half sine
Shock
(non-operating) 20G, 11MS duration, sq.wave
Vibration
(operating) 5G, 0-3 kHz at 1.0 octave/minute
Vibration
(non-operating) 10G, 0-5kHz at 1.0 octave/minute
Table A-3 Environmental Requirements (Continued)
Table A-4 General Specifications
Specification Description
Configurable port types The FC 16B supports F_Port, FL_Port, and E_Port
connections.
EMI rating An operating FC 16B conforms to the EMI (electromagnetic
interference) radiation levels specified by the following
regulations:
FCC Rules & Regulations, Part 15B, Class A level
CISPR22 Class A
EN55022 Class A
VCCI Class A ITE
AS/NZS 3548 Class A
System architecture Non-blocking shared-memory switch
System processor Intel 80960VH, 100MHz CPU
ANSI Fibre Channel protocol FC-PH (Fibre Channel Physical and Signalling Interface
standard)
Modes of operation Fibre Channel Class 2 and Class 3
Fabric initialization Complies with FC-SW 5.0
FC-IP (IP over Fibre Channel) Complies with FC-IP 2.3 of the FCA profile
Aggregate switch I/O bandwidth 64 Gbps if all 16 ports running at 2Gbps, full duplex
Frame buffers 27 buffers per E_Port and 16 buffers per F_Port at 2112 bytes
per frame