Filter
Top Products
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide A-1
Appendix
A
Product Specifications
This appendix provides the following information:
• Switch Components on page A-1
• Weight and Physical Dimensions on page A-2
• Facility Requirements on page A-2
• Power Supply Specifications on page A-3
• Environmental Requirements on page A-3
• General Specifications on page A-4
• Memory Specifications on page A-5
• Optical Port Specifications on page A-5
• Serial Port Specifications on page A-5
• POST Specifications on page A-6
• Regulatory Compliance on page A-7
Switch Components
The FC 16B switch consists of the following components:
• A 1U chassis, designed to be mounted in a 19-inch rack, with forced-air cooling that flows
from the power supply side of the switch to the SFP media side.
• 16 optical ports, compatible with SFPs (small form factor pluggable media).
• One RS-232 serial port (DB9 connector) on the SFP media side.
• One IEEE compliant RJ-45 connector on the SFP media side for use with 10/100 Mbps
Ethernet or in-band.
• Human-readable labels and bar code labels on the front and back.
• A total of 36 LEDs
• Two LEDs for each of the 16 ports to indicate port status and link speed information.
• One LED on each power supply to indicate the status of that power supply.
• One LED on the left of the SFP media side to indicate whether the switch has power.
• One LED in the center of the power supply side to indicate the overall switch status.
• Two universal input and redundant power supplies with AC switches and built-in fans. The
power supplies plug into internal blind-mate connectors when installed in the chassis.