Filter
Top Products
Troubleshooting 63
Table 18 Troubleshooting: Configuring
Problem Possible cause Possible solution
After connecting more than one port to
another switch or destination device, the
port activity LEDs continuously indicate
activity.
Because there are multiple links across
this device and the destination device,
they form loops, which cause broadcast
storms.
Enable STP if you want multiple links.
This setting prevents loops and maintains
standby links for resilience in case of
primary link failure.
While configuring VLANs, you cannot
enable a port in multiple VLANs.
A port can be part of only one VLAN
unless the port is a tagged port.
Make sure that you enable the port as a
tagged port.
While assigning the ports to VLANs, the
GbE2 Interconnect Switch does not let
the user enable two adjacent ports into
two different VLANs.
The ports could be two adjacent ports
that are bundled in a Port Trunk.
Two ports that are assigned to a Port
Trunk cannot be assigned to two
different VLANs. Either break the trunk to
assign it two different VLANs or assign
the ports to one VLAN.