Chapter 3 213
Command Definitions C-E
DSTAT
If you have purchased Mirrored Disk/XL, you may see PENDING or DISABLED as well.
PENDING indicates the partner disk failed to mount; DISABLED indicates the volume is not
abailable to the system due to a disk failure. If you have Mirrored Disk/XL you also may
see the following suffixes in the status portion of the display:
-MD Mirrored disk
-SU Split user volume
-SB Split backup volume
Use
This command may be issued from a session, job, program, or in BREAK. Pressing Break
has no effect on this command.
Example
To display the status of LDEV 1, enter:
:
:DSTAT 1
LDEV-TYPE STATUS VOLUME (VOLUME SET-GEN)
1- 079371 MASTER MEMBER1 (MPEXL_SYSTEM_VOLUME_SET-0)
:
Related Information
Commands SYSGEN, LMOUNT, LDISMOUNT, MOUNT, DISMOUNT, VSRESERVE,
VSRELEASE, VOLUTIL Utility
Manuals Volume Management Reference Manual
LONER The volume is in the LONER state when its master is not mounted or when
the volume set is closed by the VSCLOSE command.
MASTER A volume in this state is the master volume of a volume set. In order for the
system to recognize the volume set, the master volume must be mounted.
MEMBER A volume in this state belongs to a volume set whose master is mounted. If
the master is not mounted, the volume is in the LONER state.
Status Meaning