Filter
Top Products
Chapter 6 527
Command Definitions P-R
RUN
Continuing with the PDD area, the remaining columns starting with Type through R/W
are interpreted in the same manner as explained in the Export Data Section.
Compatibility Mode
A compatibility mode loader map shows information on the origin and destination of the
reference. The exact origin or destination is identified by the file type, the segment within
the file, and by the STT entry of the segment. The level of parameter checking is also
listed. For example:
PROGRAM FILE SAMPLE.LOADER.MPEXL
TERMINATE PROG 0 4 0 SSL 0 2 41
GETUSERMODE PROG 0 3 0 SSL 0 13 44
GETPRIVMODE PROG 0 2 0 SSL 0 14 44
301
The first entry reading across lists the name. The next four entries show the information
for the reference origin. The last four show the information for the reference destination:
Reference Origin Reference Destination
F T L S S F T L S S
i y C T e i y C T e
l p T g l p T g
e e e e
TERMINATE PROG 0 4 0 SSL 0 2 41
GETUSERMODE PROG 0 3 0 SSL 0 13 44
GETPRIVMODE PROG 0 2 0 SSL 0 14 44
301
The file types are:
PROG Compatibility mode program file
SSL SL.PUB.SYS
PSL SL.PUB.account
GSL SL.group.account
LC (Level of file checking):
0 No checking
1 Check procedure type
2 Check number of parameters
3 Check parameter type
STT is the segment transfer table entry within the segment.
Seg is the logical segment number of the segment.
A list of the CSTX numbers (the single number 301 in this example) assigned to the
segments of the program follows the load map. The first number in the list corresponds to
logical Seg 0, the second to logical Seg 1, and so on.