Filter
Top Products
Chapter 8 701
Command Definitions SP-Z
VSTORE
VSTORE
Verifies that the data on a backup media are valid (for example, there are no media errors),
and reports any errors incurred by STORE when creating the backup.
Syntax
VSTORE[ vstorefile][;filesetlist][ ;option [ ;... ] ]
where option is:
[ ;SHOW [ =showparmlist]]
[ ;ONERROR= { QUIT SKIP } ]
[ ;DIRECTORY]
[ ;PROGRESS [ =minutes]]
[ ;COPYACD [ ;NOACD] ]
[ ;TREE [ ;NOTREE] ]
[ ;NODECOMPRESS ]
[ ;STOREDIR] [ ECTORY] =directoryname ] [ ;PART [ IAL] DB ]
[ ;RESTORESET=(device [,...]) ]
The following parameters are available with TurboStore/iX II and TurboSTORE/iX
True-Online Backup products only:
[ ;RESTORESET=(device[,...]) [,(device[,...])[,...]]]
[ ;MOSET=(ldev[,...])[,(ldev[,...]) [,...] ]
[ ;NAME=backupname]
Parameters
vstorefile The name of the device that contains the files you want verified on the
system. This file must be backreferenced, using an asterisk (*). A File
equation for vstorefile should be set up before invoking VSTORE. If you want
to verify files from a file called SOURCE enter this file equation before
running VSTORE:
:< user FILE SOURCE;DEV=TAPE
The vstorefile can now reference a remote device. For example,
:< user |FILE REMOTE;DEV=REMSYS#TAPE|
:< user |VSTORE *REMOTE;@;SHOW|
NM Vstore will verify all files from the specified remote device. Although
the initial tape mount request will appear on the remote console, all of
Vstore's console messages will be displayed on the local console. Currently,
labeled tapes and Magneto-optical devices cannot be used for remote
verification.
A message is displayed on the system console requesting the operator to
mount the tape identified by the vstorefile parameter and to allocate the
device.