Filter
Top Products
Chapter 5 401
Command Definitions L-O
NSCONTROL
NSCONTROL SERVER Alters the characteristics of the Network Service processes.
NSCONTROL STATUS Displays information about the Network Services.
NSCONTROL VERSION Displays the overall version of the Network Services subsystem,
and optionally the version of each of its modules.
Examples
Start the transport subsystem on the "LAN1" and "WIDE" networks, then start all of the
NS network services:
:NETCONTROL START;NET=LAN1
:NETCONTROL START;NET=WIDE
:NSCONTROL START
Stop all Network Services, while letting existing users continue their work:
:NSCONTROL STOP
Stop the VT and Reverse VT services only. Let all other started services remain available:
:NSCONTROL STOP=VT,VTR
Enable logging of information from DSLINE and REMOTE HELLO commands, and
service requests received by the DSDAD process:
:NSCONTROL LOG=ON,ENV,LOW;LOG=ON,DSDAD,HIGH
Set the minimum number of running DSSERVER processes to 2 and the maximum to 10:
:NSCONTROL SERVER=DSSERVER,2,10
Show the status of Network Services:
:NSCONTROL STATUS=SERVICES
SERVICE TYPE SERVER DESCRIPTION
.
RPM REMOTE DSSERVER INCOMING REMOTE PROCESS MANAGEMENT
VTL LOCAL VTSERVER OUTGOING VIRTUAL TERM
VT REMOTE VTSERVER INCOMING VIRTUAL TERMINAL
.
.
.
Display the overall version and product number of the Network Services subsystem:
:NSCONTROL VERSION
Network Services overall subsystem version: B.00.10
NS3000/XL SERVICES: 36920B
Related Information
Commands NETCONTROL
Manuals Migration Process Guide (30367-60003)