Filter
Top Products
748 Appendix C
Terminal and Printer Types
Table C-3 MPE V/E Terminal and Similar MPE/iX Terminal Types
Table C-4 MPE V/E Terminal and Similar MPE/iX Printer Types
MPE
V/E\Terminal
Description
MPE/iX
\Terminal
Comments
6,9 Non-HP hardcopy device
needing delays after
linefeed or formfeed.
None Devices that need delays are not
supported on MPE/iX.
10 General HP CRT terminal
using both ENQ/ACK and
XON/XOFF.
10 Only XON/XOFF protocol is
used on MPE/iX.
12 8-bit character version of
terminal type 10. Used with
languages that need
extended character sets.
10 It is necessary to
programmatically set parity to
NONE.
13 Terminal type 10 with no
echo or ENQ/ACK protocol.
Used for plotters or the HP
2601 printer.
None These devices are not supported
on MPE XL.
15,16 8-bit and 7-bit HP 2635
hardcopy terminal.
None The HP 2635 is not supported on
MPE/iX.
18 (Terminal) Terminal type 10 without
ENQ/ACK protocol or a
READ trigger. Used with
non-HP devices.
18 Terminal type 18 is the same on
MPE V/E and MPE/iX , except
that an enhanced XON/XOFF
protocol is used on MPE/iX.
18 (Printer) Non-HP devices or
application printers.
18 The MPE V/E terminal type 18
and MPE/iX printer type 18 are
the same except that an
enhanced XON/XOFF protocol is
used on MPE/iX.
MPE
V/E\Termina
l
Description
MPE/iX
\Printe
r
Comments
Terminal
Type PCL18
Terminal type 18 with a
printer initialization string
and an XOFF timer. Used
with the HP 2687A.
None The HP 2678A is not supported on
MPE/iX.
19 Remote serial spooled printer. 21 Status checking is done less
frequently on MPE/iX. The printer
initialization string is the same as
MPE V/E terminal type PCL22.
Terminal
Type PCL19
PCL Remote serial spooled
printer.
21 Status checking is done less
frequently on MPE/iX.