Filter
Top Products
642 Chapter 8
Command Definitions SP-Z
STARTSESS
The HIPRI option is used for two different purposes when logging on. It
can be used to override the system jobfence, or it can be used to override
the session limit:
• When using the HIPRI option to override the jobfence, the system first
checks to see if you have system manager (SM) or system supervisor
(OP) capability. The user who has either of these capabilities is logged
on, and the INPRI defaults to the system jobfence and execution limit.
If you do not have either of these capabilities, the system attempts to
log you on using INPRI=13 and succeeds if the jobfence is 12 or less,
and the session limit is not exceeded.
• In attempting to override the session limit (to log on after the
maximum number of sessions set by the operator has been reached),
you can specify HIPRI, but, in this case, you must have either SM or OP
capability. The system does not override the session limit automatically.
If the HIPRI option is used without SM or OP capability, the following
warning is displayed:
MUST HAVE 'SM' OR 'OP' CAP. TO SPECIFY HIPRI,
MAXIMUM INPRI OF 13 IS USED (CIWARN 1460)
NOWAIT Request that the session starts executing immediately without waiting for
a
Return on the terminal. If this parameter is specified and the target
terminal is the system console, system manager (SM) capability is
required.
ciinfo An INFO string to be passed to the command interpreter. For the MPE/iX
CI, it is the first command to be executed by the command interpreter.
This parameter replaces the :( ) COMMAND
LOGON command and approximates its function. The :( ) COMMAND
LOGON command caused the session to terminate after executing the
specified command. In contrast, the ciinfo parameter does not terminate
the session unless ciparm is set to 1, 3, or 5.
Running the CI as a child process in this way restricts the flexibility of
ciparm. More flexibility is available by running the CI as a standalone
program.