Filter
Top Products
Chapter 8 709
Command Definitions SP-Z
VSTORE
backupname A three field name of a total maximum length of 26 characters. The format
is fname.gname.aname. The name represents the "handle" to this particular
backup and can is used to retrieve files from this backup. The fname, gname
and aname can be up to 8 alphanumeric characters. For example
DAILY.D24OCT90.SYSTEM.
Operation Notes
This command verifies that there are no media errors on backup media. It reports any
errors that may have occurred during the STORE procedure.
Your capabilities determine which files you may verify. If you have system manager or
system supervisor capability, you can verify any file from a STORE backup. If you have
account manager capability, you can verify any file in your account. To verify files with
negative file codes, you need Privileged Mode (PM), system supervisor (OP), or system
Manager (SM) capability. If you have standard user capability, you can verify only those
files in your logon account.
This command applies only to NMSTORE tapes created in Native Mode. It does not work
on tapes created by Compatibility Mode STORE.
The LOCAL option is no longer needed to verify files. All files will be verified and displayed
with their real filenames, even if parts of a file's accounting structure do not exist on the
system.
Use
This command may be issued from session, job, or program, but not in BREAK. If you
press [Break] during a Vstore, the operation continues while you interact with the CI.
EXAMPLE
To verify all files in a system:
1. Write a file equation to set up a device file.
:FILE T;DEV=TAPE
2. Use the VSTORE command and backreference the device file.
:VSTORE *T;@.@.@;KEEP;SHOW
Related Information
Commands STORE, RESTORE
Manuals STORE and TurboSTORE/iX Manual
Magneto-Optical Media Management User's Guide