Filter
Top Products
• Comply with all minimum prerequisites as listed in “Minimum source server prerequisites for
all migrations” (page 35).
• During migration, the migration Agent initiates an operating system reboot on the source
server. Verify that the operating system is on the first boot order. If not, manually change the
boot order:
◦ For Windows Server 2003, edit the [system drive]\boot.ini file or use the
bootcfg.exe tool.
◦ For Windows Server 2008 or later, use the bcdedit.exe tool.
Source virtual machine prerequisites
If you are migrating from a source virtual machine, verify that it complies with all minimum
prerequisites as listed in “Minimum source server prerequisites for all migrations” (page 35).
Destination physical server prerequisites
If you are migrating to a destination physical server, verify that the following prerequisites are
completed:
• Configure the primary storage controller with drives attached.
• Connect and configure the NIC cards.
• Manually boot the destination server with the Insight Control server migration ProLiant Boot
CD ISO and make sure that it is running the migration Agent.
• Select the Auto Boot option in step 3 of the migration wizard to automatically boot the
desalination server with Insight Control server migration ProLiant Boot CD ISO.
NOTE: For Gen8 servers, Manual Boot option is not supported.
Destination virtual machine host or virtual machine prerequisites
If you are migrating to a destination virtual machine, verify that the following prerequisites are
completed:
• Select one of the following:
Let Insight Control server migration create the virtual machine automatically, which will
automatically create and boot the destination virtual machine by using the server migration
Virtual Machine Boot CD ISO.
◦
◦ Create the virtual machine manually, and then boot the virtual machine manually by using
the server migration Virtual Machine Boot CD ISO.
• Verify that the destination virtual machine host has sufficient system resources, including
processor, memory, and disk space to host the migrated virtual machine guest.
• Temporarily disable any antivirus software auto-scans on the destination virtual machine host
to prevent interrupting the migration process. Re-enable the antivirus software after the
migration.
Preparing for a Linux server migration
The following sections list prerequisites for a Linux server migration.
• If a firewall is running on the source server and Source Agent deployment is required, see
“Disabling firewalls” (page 20).
• Make sure that the SSH port is open when a firewall is in use, or the server migration Source
Agent might not be deployed successfully.
Prerequisites 37