Filter
Top Products
Network Configuration page. The name is displayed as Broadcom Corporation, Unknown
device instead of HP Ethernet 1Gb 4-port 331i-SPI Adapter.
Suggested action
No action required.
Unable to launch server migration tools from Systems Insight Manager
When you launch server migration tools from Systems Insight Manager, the system displays the
following error message:
An Exception occurred. SSO Validation Failed. Try launching again from
HP SIM.
VMwareDisconnectTimeout = 300000
Suggested Action
Perform the following steps:
1. In the hpvmm.conf file (<Insight Control server migration Installation Folder>\bin), add the
following:
VMwareDisconnectTimeout = 300000
2. Save the file and restart the server migration services.
NOTE: If this issue occurs again, change the VMwareDisconnectTimeout value from 300000
to 600000.
Static IP configuration fails on Hyper-V VM when configured using Boot CD
When you perform a Manual Boot operation using the Insight Control server migration Boot CD
for VMs on Microsoft Windows Server 2008 R2 with Hyper-V and Microsoft Windows Server
2012 with Hyper-V, and configure static IP on the Network configuration page, the following error
is displayed:
Selected Network Card doesn't have link - verify you have chosen the
correct device.
Cause
Static IP configuration fails on Microsoft Windows Server 2008 R2 with Hyper-V and Microsoft
Windows Server 2012 with Hyper-V.
Suggested action:
To resolve this issue, perform one of the following:
• Use the Auto boot option and enter the desired IP address in the step 3 of the Insight Control
server migration wizard.
• For Manual Boot option, select the required option on the Network configuration page to
configure dynamic IP using DHCP.
Unable to migrate Windows 2008/2008 R2/2012 using Windows 2008 x64 CMS
Cause
Deployment Image Servicing and Management (DISM) tool is unavailable on the CMS.
Suggested Action
To resolve the issue, perform the following steps:
50 Troubleshooting