Filter
Top Products
To store the print cartridge in the Print Cartridge Protector
1. Insert the print cartridge into the protector and snap it securely in place.
2. To remove the print cartridge from the protector, press down and back on the tab inside the
protector to release the print cartridge, and then remove the print cartridge.
Printing with a single print cartridge
NOTE: To place the printer in Ink-backup Printing Mode, remove the empty cartridge.
If one of the print cartridges runs out of ink before you can replace it, you can still print with a single
print cartridge.
Cartridge used Output
Tri-color Color and very dark purple (not true black)
Photo Grayscale for color segments and black for black segments
Black Grayscale
Gray photo Grayscale
NOTE: Printing from one print cartridge, rather than two, may be slower and the print quality may
be affected. It is recommended to print with both print cartridges.
If using only the Photo print cartridge, colors may not print correctly.
For borderless printing, the tri-color print cartridge must be installed.
24 Chapter 3 Using print cartridges and accessories ENWW