Filter
Top Products
Printing on envelopes
NOTE: Avoid using envelopes that have clasps or windows; have thick, irregular, or curled edges;
are shiny or embossed; or are wrinkled, torn, or otherwise damaged.
1. Raise the output tray and remove any media from the input tray.
2. Insert up to 15 envelopes along the right side of the input tray, with the flaps facing up and to
the right, until they stop.
3. Press the button on top of the paper width guide and slide the guide to the right until it stops at
the edge of the envelopes.
4. Press the input tray lock and retract the tray until it stops at the edge of the envelopes.
5. Lower the output tray.
6. For Windows:
a. Open the printer driver (see Printing a document on page 49).
b. Click the Features tab.
c. Select the envelope size from the Size drop-down list.
d. Change any other desired print settings and click OK.
e. Print your file.
For Macintosh:
a. Click File, and then click Page Setup.
b. Select the envelope size and click OK.
c. Click File and then click Print.
d. Change any other desired print settings and click Print.
7. When you have finished printing, remove the remaining media:
a. Raise the output tray. Press the input tray lock and extend the tray.
b. Remove the media and reload the desired media into the input tray (see
Loading media in
the input tray on page 36).
ENWW Printing on envelopes 55