Filter
Top Products
ENWW Loading media into the paper input tray 23
Loading media into the paper input tray
The paper input tray holds up to 250 pages of 20 lb (75 g/m
2
) paper or fewer pages of heavier
media (25 mm or less stack). Load media with the top forward and the side to be printed facing up.
To prevent jams and skewing, always adjust the side media guides and long media support.
CAUTION If you try to print on media that is wrinkled, folded, or damaged in any way, a jam might occur. See Printer
media specifications for more information.
Note When you add new media, make sure that you remove all of the media from the paper input tray and
straighten the stack of new media. This helps prevent multiple sheets of media from feeding through the
printer at one time, reducing media jams.
Specific types of media
● Transparencies and labels: Load transparencies and labels with the top forward and the
side to be printed facing up. See Printing transparencies and labels
for more information.
● Envelopes: Load envelopes with the narrow, stamp side forward and the side to be printed
facing up. See Printing envelopes
for more information.
● Letterhead and preprinted forms: Load letterhead and preprinted forms with the top forward
and the side to be printed facing up. See Printing letterhead and preprinted forms
for more
information.
● Custom-sized media and card stock: Load custom-sized media and card stock with the
narrow side forward and the side to be printed facing up. See Printing custom-sized media and
card stock for more information.