HP (Hewlett-Packard) 1005 Series Printer User Manual


 
24 Chapter 3 Media ENWW
Printing transparencies and labels
Only use transparencies and labels that are recommended for laser printers, such as
HP transparency film and HP LaserJet labels. See Printer media specifications
for more
information.
CAUTION Inspect the media to make sure that it is not wrinkled or curled and that it does not have any torn edges
or missing labels.
CAUTION Do not use labels that have exposed backing. Labels can peel off of sheets that have spaces between
the labels, causing serious jams.
To print transparencies or labels
1 Open the straight-through output door.
2 Load the media in the paper input tray. Make sure that the top of the media is forward and the
side to be printed (rough side) is facing up.
3 Adjust the media guides.
4 Access the printer properties. See Printer properties (driver)
for instructions. Click the Paper
tab, select Transparency or Labels from the Optimize for drop-down list, and click OK.
5 Print the document. To prevent the media from sticking together, remove the media from the
back of the printer as it prints, and place the printed pages on a flat surface.