Filter
Top Products
ENWW Improving print quality 47
Curl or wave
● Check the media type and quality. Both high temperature and humidity cause media to curl.
See Printer media specifications
for more information.
● The media might have been in the paper input tray too long. Turn over the stack of media in
the tray. Also, try rotating the media 180° in the paper input tray.
● Open the straight-through output door, and try printing straight through. See Printer output
paths for more information.
● The fuser temperature might be too high. Access the printer properties. See Printer properties
(driver) for instructions. Click the Paper tab, and make sure that you have selected the
appropriate media from the Optimize for drop-down list.
Wrinkles or creases
● Make sure that the media is loaded properly. See Loading media into the paper input tray for
more information.
● Check the media type and quality. See Printer media specifications for more information.
● Open the straight-through output door, and try printing straight through. See Printer output
paths for more information.
● Turn over the stack of media in the tray. Also, try rotating the media 180° in the paper input
tray.
Toner scatter outline
● Access the printer properties. See Printer properties (driver) for instructions. Click the
Configure tab, and select On in Transfer Setting.
● If large amounts of toner have scattered around the characters, the media might be resisting
the toner. (A small amount of toner scatter is normal for laser printing.) Try a different media
type. See Printer media specifications
for more information.
● Turn over the stack of media in the tray.
● Use media designed for laser printers. See Printer media specifications for more information.