Filter
Top Products
Configure trays
The product automatically prompts you to configure a tray for type and size in the following situations:
●
When you load paper into the tray
●
When you specify a particular tray or media type for a print job through the printer driver or a
software program and the tray is not configured to match the print-job’s settings
NOTE: The prompt does not appear if you are printing from Tray 1, and it is configured for the Any
Size and Any Type settings. In this situation, if the print job does not specify a tray, the product prints
from Tray 1, even if the paper size and type settings in the print job do not match the paper loaded in
Tray 1.
Configure a tray when loading paper
1. Load paper in the tray. Close the tray if you are using Tray 2 or 3.
2. The tray configuration message appears.
3. Do one of the following:
●
Press the OK button to accept the size and type.
●
To modify the tray size configuration, press the down arrow
to highlight the Modify
option, and then press the OK button.
a. Press the down arrow
to highlight the correct size, and then press the OK button.
b. Press the down arrow
to highlight the correct type, and then press the OK button.
Configure a tray to match print job settings
1. In the software program, specify the source tray, the paper size, and the paper type.
2. Send the job to the product.
If the tray needs to be configured, the tray configuration message appears.
3. Load the tray with the specified size and type of paper, and then close the tray.
4. When the size and type confirmation messages appear, press the OK button to confirm the paper
size and type.
Configure a tray from the control panel
You can also configure the trays for size and type without a prompt from the product.
1.
Press the Home
button.
2. Open the Trays menu.
3. Press the down arrow
to highlight the size or type setting for the desired tray, and then press the
OK button.
94 Chapter 6 Paper and print media ENWW