Filter
Top Products
NetMail/3000 Menu Interface
Users Guide
2-98
HP AdvanceLink Terminal Emulator
For users running HP’s Advancelink for DOS terminal emulator, there are some special
setup steps you need to perform in order to be able to allow NetMail/3000 to automatically upload
and download files between the HP3000 and your PC. If you do not take these steps, you will still
be able to run NetMail/3000 and have all the capabilities of an HP terminal, but will not have the
option of attaching files from your PC or saving them to the PC.
Users of AdvanceLink for Windows or other platforms should see the section on using
Unison Software’s Business Session product, as those products are identical.
To enable your PC to allow automatic file transfers from NetMail/3000;
1) Create a control file on your PC (preferably in the ADVLINK directory) using any PC
file editor, and enter the following in the file:
&hp3000 on
&hostcontrol 126
&hostcopy “run monitor.pub.sys”
Save the file as ‘
ctrlfile
’ in the ADVLINK directory.
2) When you start AdvanceLink, specify the control file name. For example:
C:\ADVLINK>
advlink ctrlfile
3) Once logged on to the HP3000, before running NetMail/3000, issue the following MPE
command:
:SETJCW ALDOS=1