Filter
Top Products
reference guide
use the fax features
35
7 Press to display Redial or No Redial options.
8 When the desired setting appears, press Enter to select it.
use Error Correction Mode (ECM)
ECM eliminates data lost due to poor phone lines by detecting errors that occur
during transmission and automatically requesting retransmission of the
erroneous portion. Phone charges are unaffected, or may even be reduced, on
good phone lines. On poor phone lines, ECM increases sending time and
phone charges, but sends the data much more reliably. Turn ECM off (the
default setting is on) only if it increases phone charges substantially and you are
willing to accept poorer quality in exchange for reduced charges.
1 Press Menu.
2 Press 6, then press 7.
This selects Advanced Fax Setup, then selects Error Correction Mode.
3 Press to switch between Off and On.
4 Press Enter to use the selected setting.
set automatic reduction
This setting determines what your HP OfficeJet does if it receives a fax too large
for the default paper size. With this setting on (the default), the image is reduced
so that it attempts to fit on one page. With this feature off, the information that
will not fit on the first page is printed on a second page.
1 Press Menu.
2 Press 6, then press 5.
This selects Advanced Fax Setup, then selects Automatic Reduction.
3 Press to switch between Off and On.
4 Press Enter to use the selected setting.
adjust the volume
Your HP OfficeJet provides three levels for adjusting the ring and beep volume.
The default setting is Soft.
1 Press Menu.
2 Press 7, then press 5.
This selects Maintenance, then selects the Ring and Beep Volume option.
3 Press to select one of the options: Soft, Loud, or Off.
4 Press Enter.