Filter
Top Products
Table 30. MCT load command settings for low paper and critically low paper (continued)
Dec Hex
40 28 LowPaperCalibrationConstant; The high order bit to this
variable is set after this printer has calibrated the Low Paper.
The lower order bits are the number of mm the printer will feed
after detecting the sensor change until the paper is out.
Firmware offline tests (Models 2xR)
To enter the firmware offline test and setup procedures for 4610 Models 2xR,
complete the following steps:
1. Open the paper cover (C) and press the power button to power on the
printer. The power button comes with a cover over it, so it may be necessary to
use a paper clip or similar item to push the button through the cover. See
Figure 4 on page 103 for the location of the power button.
A
B
C
Figure 3. Paper feed and document feed buttons
102 SureMark 4610 Printers : Programming Guide for Models 1xR and 2xR