Filter
Top Products
v If the printing area is defined outside the maximum page size, the
printing area is limited to the page size.
v Maximum page size is 576 dots in the horizontal direction, and 800 dots
in the vertical direction (except Models Tx8 and Tx9, which is 1250 dots
in the vertical direction).
Select printing direction/position
Syntax:
ESC T n or X'1B;54;n'
Where:
n
Table 14. Print direction
n = Direction / position
X'00' Left to right / top left
X'01' Bottom to top / bottom left
X'02' Right to left / bottom right
X'03' Top to bottom / top right
Remarks:
When sent in standard mode, this command sets the print direction for
page mode, but has no effect on standard mode printing.
Starting position is within the printable area defined by the Select printable
area command (X'1B;58...)'.
Set vertical position
Syntax:
GS $ y or X'1D;24;y'
Where:
y is a two-byte vertical printing position (in dots)
Remarks:
v Applies to page mode only.
v Moves the printing position to the specified dot position perpendicular
to the printing direction specified by the Select printing direction
command. If printing direction is bottom-to-top, or top-to-bottom, this
command adjusts the printing position in the horizontal direction.
v If the value of y is outside the specified printable area, this command is
ignored.
Set relative vertical position
Syntax:
GS \ y or X'1D;5C;y'
Where:
y is the two-byte vertical printing position (in dots).
Remarks:
v Applies to page mode only.
80 SureMark 4610 Printers : Programming Guide for Models 1xR and 2xR