Notes for when replacing:
1. When replacing the keyboard, check that the three
cables are clean, and inserted straight and fully into
the connectors. Slide both ends of each latch at the
same time to make sure that each cable is correctly
inserted.
Warning: While pressing the cables into place, be
careful not to break the flexible cables.
Go to “Keyboard/Auxiliary Input Device Checkout” on
page 203 and test all keys before returning the
computer to the customer.
2. When replacing the upper cover, insert the two
latches located on the rear side of the cover into the
guide of the LCD foot; then push the right, left, and
front sides to snap them into place. Be careful not
to damage the suspend/resume switch when
putting on the cover.
ThinkPad 355x, 360x, 370C, 750x, 755C, 755Cs
243