Important
Two types of LCDs are available for the Model
755C: one with a contrast control and one
without. Make sure that you replace the LCD
with the correct type.
The LCD for the Model 370C does not have a
contrast control.
1 When replacing the LCD ground-terminal screw, do
not pull or push the LCD cables.
2 When removing the LCD cables, pull the connector
straight up. Incorrect handling can damage the
connector.
Note: For the color models, make sure the indicator
does not catch the right LCD connector when
replacing the status indicator.
3 Remove the screw.
4 Remove the right hinge cover.
5 When removing the left hinge cover, use a small
screwdriver as shown to release the latch from the
rear base cover. Pull the hinge cover slightly upward
to keep it unlatched.
6 From the front side, remove the latch with a small
screwdriver as shown to remove the cover. Be
careful not to scratch the surface of the computer
when you use a screwdriver to remove the
latches.
7 Remove the four screws.
Use the following table for reference when replacing parts.
Safety Notice 5: Translation on page 11
If the LCD breaks and the fluid from inside the LCD
gets into your eyes or on your hands, immediately
wash the affected areas with water for at least 15
minutes. Seek medical care if any symptoms from the
fluid are present after washing.
Step Location (Quantity) Length
1 LCD ground-terminal (1) 4 mm
3 LCD hinge cover, right (1) 4 mm
7 LCD hinge (4) 4 mm
Note: Make sure you use the correct screw.
ThinkPad 355x, 360x, 370C, 750x, 755C, 755Cs 275