Filter
Top Products
8. Insert the DIMM into the connector. Firmly press the DIMM straight down into
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, and then reinsert it.
DIMM 5
DIMM 4 DIMM 3
DIMM 2
DIMM 1DIMM 6
9. If you have other options to install or remove, do so now. Otherwise, replace
the side cover (see “Replacing the side cover” on page 51.
10. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
Chapter 4. Installing options 43