Filter
Top Products
Customizing the TrackPoint
Increasing memory
Increasing memory capacity is an effective way to make programs
run faster. You can increase the amount of memory in your com-
puter by installing a dual inline memory module (DIMM), available as
an option.
Different capacities of DIMM are available. You can install DIMMs
directly in the memory slots on the bottom of the computer. Your
computer memory capacity can be expanded up to 192 MB (one 128
MB DIMM option).
Note: Base memory (32 MB or 64 MB) is internal and cannot be
upgraded.
Attention: The ThinkPad i Series 1200/1300 computer supports the
static dynamic random access memory (SDRAM) card only. It does
not support the enhanced data output dynamic random access
memory (EDO DRAM) card. If you install a DIMM that is not sup-
ported by your computer, an error code might appear when the
system starts. The appropriate memory option can be purchased
through your IBM reseller or IBM marketing representative.
To install the DIMM, do the following:
1. Power off the computer; then disconnect the AC Adapter and all
cables from the computer.
2. Close the LCD, turn the computer over, and then remove the
battery pack.
3. Loosen the screw on the memory slot cover; then remove the
cover.
52 ThinkPad i Series 1200/1300 User's Reference