Filter
Top Products
v Make sure that the correct device driver is installed. To download or get
information about the latest supported device drivers, utilities, and
documentation, go to http://www.ibm.com/pc/support/. Also see the
Installation and User’s Guide for your blade server for additional information.
v Make sure that the BIOS or firmware code in the expansion card is at the
latest level.
v Make sure that you have the correct expansion card NVRAM settings for
your SAN and operating system.
To
determine whether your installation problem is caused by the system
configuration, check the blade server to make sure that it is configured
correctly:
v If the I/O expansion card is installed in a BladeCenter HS20 or HS40 blade
server, see “Configuration Settings menu options” on page 17 for additional
information.
v If the I/O expansion card is installed in a BladeCenter JS20 blade server, see
the IBM FAStT Management Suite Java User’s Guide version 1.0 or later that is
available at http://www.ibm.com/pc/support/.
If
you still have a system configuration problem, see the documentation that
comes with your BladeCenter unit, or contact your IBM technical-support
representative to determine whether your system board requires a special
configuration.
To determine whether your installation problem is caused by an attached Fibre
Channel device, perform the following tasks:
v Make sure that an I/O module that supports Fibre Channel operation is
installed in I/O-module bay 3, I/O-module bay 4, or both I/O-module bays
3 and 4.
v Make sure that the blade server is turned on.
v Make sure that the expansion card settings are set to the correct values:
– If the I/O expansion card is installed in a BladeCenter HS20 or HS40
blade server, see “Configuration Settings menu options” on page 17. for
additional information.
– If the I/O expansion card is installed in a BladeCenter JS20 blade server,
see the IBM FAStT Management Suite Java User’s Guide version 1.0 or later
that is available at http://www.ibm.com/pc/support/.
28 Installation and User’s Guide for HS20/HS40 and JS20 Fibre Channel expansion cards