Filter
Top Products
v Ring Indicate Power-On Menu
RING INDICATE POWER-ON MENU
1. Ring indicate power-on :
Currently Enabled
2. Number of rings:
Currently 3
30. Refresh Modem Settings
98. Return to Previous Menu
Ring indicate power-on is enabled by default on both serial port 1 (S1) and serial port
2 (S2). When ring indicate power-on is enabled, call-in is disabled.
If ring indicate power-on is enabled and call-in is already enabled, you will be asked
to confirm your choice. Refer to the message displayed on your screen.
If the ring indicate power-on setting is changed, you must select option 30, Refresh
Modem Settings to update the modem settings. If Refresh Modem Settings is
selected, and the modem(s) have not been configured, you will be asked to configure
the modems first. See “Call-In/Call-Out Setup Menu” on page 44 for information on
configuring modems.
Option 2 is used to set the number of rings.
28 Eserver pSeries 690 User’s Guide