Filter
Top Products
39
Console Command Reference
CHAPTER 3
set-passwd
Changes the console password. The system first prompts you for the
old password. You then type a new password and retype it for
verification. Passwords never appear on the screen.
SYS_console> set-passwd
Enter old password:
Enter new password:
Enter new password again:
CLI running password changed
CLI password change in the NVRAM OK
If you enter the old password incorrectly or don’t verify the new
password correctly, the password isn’t changed.
System Commands
sys-stat
Displays general status information about the switch and its SNMP
agent hardware and software:
SYS_console>sys-stat
Intel Express 10/100 Fast Ethernet Switch
SNMP Agent Software - Version <version>
SNMP Object ID is : < .1.3.6.1.4.1.629.1.1.3 >
System MAC Address : 00-A0-C9-00-20-D9
Switching Data Base Size : 4096 entries
Total uptime(hundredths of seconds ): 111151888
Total uptime(days, hh:mm:ss format): 12 days, 20:45:18.88
i/f 1 -- description [ Port 1 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 2 -- description [ Port 2 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 3 -- description [ Port 3 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 4 -- description [ Port 4 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 5 -- description [ Port 5 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 6 -- description [ Port 6 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 7 -- description [ Port 7 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 8 -- description [ Port 8 - 10/100 BaseTx Ethernet Port ] -- status [up]
i/f 9 -- description [ Port 9 - missing ] -- status [DOWN]
i/f 10 -- description [ Port 10 - missing ] -- status [DOWN]
i/f 11 -- description [ Port 11 - missing ] -- status [DOWN]
i/f 12 -- description [ Port 12 - missing ] -- status [DOWN]