Filter
Top Products
51
Console Command Reference
CHAPTER 3
Self(not user configurable). If on (denoted as a +), the entry is a
system address. These are the switch’s individual and group
addresses, as well as other addresses added by the management
system. If off (denoted as a -), the entry contains the MAC address of
a station on the network.
Dport. The destination port where frames from the MAC address are
forwarded. This doesn’t apply if the MAC address has a custom filter
applied to it.
Mgmt. If on (denoted as a +), frames from the entry are sent to the
management port on the switch.
The first section, “Database control commands,” lists commands
relevant to standard MAC addresses (for example, determining the
behavior of the switch when it sees a particular address). The second
section, “Custom filtering,” lists commands pertinent to the custom
filtering capabilities of the switch.
Database control commands
get-lt-entry
get-lt-entry <index>
Displays entry number index in the switching database. The index
range is 1 to 4096.
SYS_console>get-lt-entry 19
Entry —— MAC Address —— LOCK SELF DPORT MGMT
==============================================================
19 00-20-C5-00-59-E6 - - 5 -
The entry has these properties:
• The entry number is 19.
• The MAC address is 00-20-C5-00-59-E6.
• The entry is dynamic and will be aged out (lock is off).
• It’s not a system address (self is off).
• Frames are forwarded to port 5 only.
• Frames are not forwarded to the management port (mgmt is off).