Intel 10/100 Switch User Manual


 
88
INDEX
Intel Express 10/100 Fast Ethernet Switch
M–O
MAC address
associating with an IP address, 47
displaying, 39
Management, accessing, 16
Mgmt (Management) LED, 6
MIB
getting file for NMS, 21
getting support for NMS, 2
support, 80
monitor command, 59
Monitoring ports with protocol analyzer, 59
Multi-mode fiber cabling, 7
Netmask
setting, 44
SNMP agent for IP, 2, 21
Network management
through SNMP, 2, 21
with Console Manager, 16
Network topology and samples, 10
Node address, displaying, 39
Null-modem cable, 6
NVRAM save settings, 41
Out-of-band management
remote access, 16
setting to SLIP mode, 41
Overview, hardware, 3
P–R
Password, setting and changing, 2, 16, 39
ping command, 46
Ping commands, 46
ping-stop command, 46
Port configuration
default, 76
displaying, 65
full duplex, 22
status, 39
Power (Pwr) LED, 6
Prompt, changing, 38
Protocol analyzer, attaching, 59
Quick Start, 1, 2
Rack mount installation, 4
Rcv (Receive) LED, 5
Remote access, 16
Repeaters
cabling for, 9
count limitations, 14
Resetting counters, 66
Resetting the switch
cold-reset command, 40
warm-reset command, 40
Restoring defaults, 41
Restricting access
creating virtual LANs, 23
RFC standards supported, 80
Routers, specifying for SNMP management, 45
S
Sample topologies, 10
Security
creating virtual LANs, 23
set-passwd command, 39
Segment
each port is one segment, 4
recommendations, 4
set-auth command, 49
set-bootp command, 44
set-br-fwdel command, 64
set-br-hellot command, 63
set-br-maxage command, 63
set-br-prio command, 63
set-comm command, 48
set-def-ttl command, 45
set-fg-param command, 42
set-gatew command, 45
set-ip command, 44
set-ip-conf command, 44
set-line-slip command, 41
set-lt-age command, 54
set-par-file command, 42
set-passwd command, 39
set-port-dplex command, 22, 66