Filter
Top Products
76
C H A P T E R 4 Advanced Configuration
76
Enabling IP Filtering
IP Filtering is enabled by default. There are two default user groups,
which allow all traffic to pass. Enable is a toggle function, which also
allows you to disable IP Filtering:
1 Select IP Filtering Setup.
2 Select Enabled.
3 Set up any User Groups and Members required.
4 Click OK.
Adding a User Group Before filtering can take place, you must define the different user
groups. To add a user group:
1 Select IP Filtering Setup>User Groups.
2 Click Add.
3 Type a unique name for the User Group.
4 Click OK.
5 When the User Group list is complete, click Close.
500.book Page 76 Thursday, September 2, 1999 1:50 PM