Filter
Top Products
ADE-9040 User’s Manual
15 / 55
2. Hardware Configuration Setting
This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on ADE-9040 are in the proper position. The
default settings shipped from factory are marked with an asterisk ().
In general, jumpers on the ATX Main Board are used to select options for certain features.
Some of the jumpers are designed to be user-configurable, allowing for system
enhancement. The others are for testing purpose only and should not be altered. To select
any option, cover the jumper cap over (SHORT) or remove (NC) it from the jumper pins
according to the following instructions. Here, NC stands for “Not Connect”.
2.1 Board Layout