Filter
Top Products
ADE-9040 User’s Manual
25 / 55
3.3 Installing the ATX Mother Board
To install your ADE-9040 into standard chassis or proprietary environment, you need to
perform the following steps:
1. Check all jumpers setting on proper position
2. Install and configure CPU and memory module on right position
3. Place ADE-9040 into the dedicated position in your system
4. Attach cables to existing peripheral devices and secure it
NOTE: Please refer section 3.4 to install display and Ethernet drivers and setup your
system.
WARNING: Please ensure that your ATX Main Board properly inserted and fixed by
mechanism. Otherwise, the system might be unstable or do not work from
bad contact of golden finger.
3.4.1 Dual Marvell Gigabit Ethernet Controllers
Dual Marvell Gigabit Ethernet 10/100/1000BASE-TX controllers by PCI Express.
The ADE-9040 provides dual LED indicators on RJ-45 connectors to show LAN interface
status. These messages will give you a guide for troubleshooting.
Yellow LED indicates transmit and receive activity.
Blinking: indicates transmit/receive activity
On: indicates no activity but link is valid
Off: link is invalid
Green LED indicates Link speed
On: link speed at 1000Mbps
On: link speed at 100Mbps
Off: link speed at 10Mbps
3.4.2 Drivers Support
ADE-9040 provide on CD-Title to support on-board VGA and Ethernet device drivers in
various operating systems. Before installing the device drivers, please see the reference
files in each sub-directory. You cannot install drivers from CD-Title directly.
Intel Q965 Chipset Integrated Graphics supports Win2000, XP, Win2003 and 64bit
Windows environment.
Intel Q965 & ICH8(R) Chipset Driver supports Win2000, XP, Win2003 and 64bit Windows
environment.
Dual Marvell Gigabit Ethernet Controllers support Win2000, XP, Win2003, and 64 bit
Windows environment.