Filter
Top Products
ADE-9040 User’s Manual
51 / 55
4.1.6.1 North Bridge Configuration
You can use this screen to select options for the North Bridge Configuration. Use the up
and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the
value of the selected option.
Note: The North Bridge Configuration setup screen varies depending on the supported
North Bridge chipset.
4.1.6.1.1 Memory Remap Feature
ENABLE: Allow remapping of overlapped PCI memory above the total physical memory.
DISABLE: Do not allow remapping of memory.
4.1.6.1.2 DRAM Frequency
The item allows you to set the DRAM frequency.
4.1.6.1.3 Configure DRAM Timing by SPD
Select the operating system that is selecting DRAM timing, so select SPD for setting DRAM
timing by SPD.
The choice: [Enable], [Disable]
4.1.6.1.4 Initate Graphic Adapter
Select which graphics controller to use as the primary boot device.
4.1.6.1.5 Internal Graphics Mode Select
Select the amount of system memory used by the internal graphics device.