Filter
Top Products
ADE-9040 User’s Manual
30 / 55
4.1.2.2 IDE Configuration
4.1.2.2.1 SATA#1 Configuration
Option: [Disabled], [Enhanced].
4.1.2.2.2 Configure SATA#1 as
Option: [IDE], [RAID]
4.1.2.2.3 Primary/Secondary IDE Master/Slave
Select one of the hard disk drives to configure it. Press <Enter> to access its the sub menu.
The options on the sub menu are described in the following sections.
4.1.2.2.4 Hard Disk Write Protect
Set this option to protect the hard disk drive from being overwritten. The Optimal and
Fail-Safe default setting is Disabled.
4.1.2.2.5 IDE Detect Time Out (Sec)
Set this option to stop the AMIBIOS from searching for IDE devices within the specified
number of seconds. Basically, this allows you to fine-tune the settings to allow for faster
boot times. Adjust this setting until a suitable timing that can detect all IDE disk drives
attached is found.
The options: 0, 5, 10, 15, 20, 25, 30, 35 sec.