Filter
Top Products
ADE-9040 User’s Manual
22 / 55
3. System Installation
This chapter provides you with instructions on how to setup your system. The additional
information shows you how to install CPU/ FAN and memory.
3.1 Intel
®
µFC-LGA775 Processor
3.1.1 Installing Intel
®
Core™ 2 Duo / Pentium
®
4 / Celeron
®
D CPU
• The board comes with a surface mount LGA775 socket designed for the Intel
®
Pentium
®
4 processor in the 775-land package.
• Remove the plastic cap to install the µFC-LGA 775 Pentium 4 CPU.
• Unlock the socket by pressing the metal lever sideways to lift it up, and open the load
plate. (1, 2, 3, 4)
• Position the CPU above the socket and the gold triangular mark on the CPU must
align with pin 1 of the CPU socket. Then Insert the CPU gently seated in place.
• Close the load plate and push it back to the original position. (5, 6, 7)
Note:
Do not force the CPU into the socket. It may bend the pins and damage the CPU.
Metal level Plastic cap Pin 1 of the socket Gold triangular mark
1
2
3
4
P
6
Load plate
5
7