Filter
Top Products
ADE-9040 User’s Manual
27 / 55
4. BIOS Setup
4.1 Entering Setup
AMI BIOS has a built-in setup program that allows users to modify the basic system
configuration. This information is stored in CMOS RAM whose power is supplied by a
battery so that it can retain the setup information even when the power is turned off. Press
Delete when you Power on or Reboot the computer system. (i.e. After the logo appears at
the center of the screen, please press Delete to enter the BIOS setup program). In the
BIOS, make sure that everything is working fine before you try to optimize it for maximum
performance.
4.1.1 Main Menu
When you enter the AMI CMOS Setup Utility, the Main will appear on the screen. The Main
allows you to select several configuration options. Use the left/right arrow keys to highlight
a particular configuration screen from the top menu bar or use the down arrow key to
access and configure the information below.
4.1.1.1 System Time / System Date
Use this option to change the system time and date. The date must be entered in
MM/DD/YY format. The time is entered in HH:MM:SS format.