Filter
Top Products
5-2 PRO/100 LAN+Modem PC Card User’s Guide
How to Use Country Identifier
The country identifier utility is automatically copied to your hard drive and
launched during installation of the PRO/100 PC Card under Windows 95
and Windows NT version 4.0, or when you run the Intel Installation
Program under Windows 3.1 or 3.11. An icon for Country Identifier is
also installed in the Windows program group so that the utility can be re-
run if the country settings needs to be changed.
Follow the steps below to run Country Identifier from the Intel
program group if you need to modify the country setting chosen
during the installation process.
1 Launch Country Identifier through Windows. Either double-click
the Country Identifier icon in the PRO/100 program group, or use
the Windows File/Run command sequence and type
[path]TELSEL.EXE in the Command Line box, where [path]
indicates the location of the Country Identifier utility on your hard
drive.
2 The current country setting is listed at the top of the screen, and the
other countries supported are listed below. To change to a different
country, locate the country on the list and double click. The
application will verify that the country setting has been changed.
3 Click on Exit to close the program.
Modem Test Utility
The Intel Modem Test utility indicates the status of the COM ports on
your computer, including which COM port the Intel modem is configured
to use. The icon for this program will be installed in the PRO/100
program group at installation. Double-click the icon to run the Modem
Test utility.
If a Intel modem is enabled, the Modem Test utility can also be used as a
terminal program to input AT commands to the modem without the use
of other communications software. Click the Terminal button on the
Modem Test screen to open a window for input of modem commands.
See Chapter 6. Modem Reference for a complete list of modem
commands supported by the PRO/100 PC Card.