Filter
Top Products
Windows 3.x/MS-DOS Installation 4-17
8 Press Esc twice to bypass error messages.
9 Continue with the installation until finished.
10 Use a text editor to add the following two lines in your
CONFIG.SYS file at the location indicated by the rem statement
concerning insertion of the driver name:
DEVICE=\LSP\M16BNDIS.EXE
11 Copy M16BNDIS.EXE from the directory C:\INTEL\M16B to
the C:\LSP directory on your hard disk.
12 Use a text editor to edit the PROTOCOL.INI keyword settings in
the C:\LSP directory to match the keywords contained in the
sample PROTOCOL.INI file located at C:\INTEL\M16B as
required (unless you are using Intel PRO/100 default settings).
13 Save the files and reboot the PC.
IBM Local Area Network Support Program (version 1.2)
NDIS 2.0 Driver
1 Run the Installation Program from Intel Disk 1, Installation Disk.
2 Choose IBM LAN Support Program from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the installa-
tion.
4 Install the IBM Local Area Network Support Program according to
the instructions in the IBM Local Area Network Support Program
Users Guide. The following instructions refer to the prompts and
messages displayed with the Configuration Aid automated install
software provided with the LAN Support Program.
5 If a message appears during the LAN Support Program installation
indicating there are no IBM LAN adapters installed in the worksta-
tion, bypass the message by pressing Enter.
6 Answer [N]o to program support for the PC Network Adapter.
7 Answer [Y]es to use of programs needing the NETBIOS interface.
8 When prompted, select the Etherand Network family of network
cards.
9 Continue with the installation until finished.