Filter
Top Products
Hardware Installation 1-3
HotSwap
This card supports HotSwap on a PC Card computer that is running
Microsoft Windows 95 or Windows 3.x/MS-DOS using Card and Socket
Services. This feature allows the PRO/100 PC Card to be removed from
the computer, temporarily replaced with another type of PC card, then
reinserted without loss of the local area network connection.
Power Management Suspend/Resume
Power management features such as suspend/resume are supported by the
PRO/100 PC Card on PCMCIA systems running Windows 95 or Win-
dows NT, or Windows 3.x/MS-DOS using Card and Socket Services. This
means that when the computer enters a reduced power or power saving
mode, an ongoing local area network connection will remain active for the
period of time allowed by the network operating system
Hardware Installation
Note
Hardware installation requirements may vary with different
operating systems. For example, if your system is configured for
automatic detection of the card (for example, under Windows
95), the computer should be ON and standard operating
software loaded when the card is inserted. For installation
instructions specific to your particular environment, see the
appropriate chapter: Chapter 2. Installation with Windows 95,
Chapter 3. Installation with Windows NT, and Chapter 4.
Installation with Windows 3.x/MS-DOS.
The PRO/100 PC Card is compatible with Type II PC Card slots. The
hardware installation procedures outlined here are typical. Installation and
removal procedures vary on different PC Card-capable computers and
under different operating systems.
Unpacking and Inspection
After opening the PRO/100 PC Card box, verify that all parts are included
and have not been damaged during transportation. Retain the packing
materials.