Filter
Top Products
6-8 PRO/100 LAN+Modem PC Card User’s Guide
Dial Modifiers (continued)
@ Wait for Quiet Answer
The @ modifier in a dial string instructs the modem to wait for five
seconds of silence after dialing the number. If silence is not detected,
the modem sends a NO ANSWER result code to the user.
; Return to Command Mode after Dialing
The semicolon (;) dial modifier can be used only at the end of a
command line, immediately preceding the Enter, and instructs the
modem to return to the command mode immediately after dialing and
without breaking the connection with the distant modem.
^ Disable Data Calling Tone Transmission
The ^ modifier in a dial string disables data calling tone for the
current call (calling tone is automatically enabled in many countries).
This modifier is not available in all countries.
$ Credit Card Tone Detect
The $ modifier in a dial string instructs the modem to wait for a
credit card bong tone before processing the remaining characters in
the dial string.
En Echo Command
The ATEn command, where n represents 0 or 1, determines if the
commands you issue through the keyboard to the modem in command
mode are displayed (echoed) on your computers monitor screen.
E0 Disable echo to the computer
E1 Enable echo to the computer (default)
If the commands you type are not displayed on your monitor screen, your
software is set to expect character echo from the remote system. You can
remedy this by typing in the command ATE1. If the commands you type
are displayed on your monitor with the characters duplicated,
LLIIKKEETTHHIISS, type in the ATE0 command.