Intel MFS2600KIB Computer Hardware User Manual


 
Intel
®
Compute Module MFS2600KI TPS Functional Architecture
Revision 1.0 13
Intel order number: G51989-002
The silk screened DIMM slot identifiers on the board provide information about the
channel, and therefore the processor to which they belong. For example, DIMM_A1 is
the first slot on Channel A on processor 1; DIMM_E1 is the first DIMM socket on
Channel E on processor 2.
The memory slots associated with a given processor are unavailable if the
corresponding processor socket is not populated.
A processor may be installed without populating the associated memory slots provided
and a second processor is installed with associated memory. In this case, the memory is
shared by the processors. However, the platform suffers performance degradation and
latency due to the remote memory.
Processor sockets are self-contained and autonomous. However, all memory subsystem
support (such as Memory RAS, Error Management,) in the BIOS setup are applied
commonly across processor sockets.
For a complete list of supported memory for the Intel
®
Compute Module MFS2600KI, refer to the
Tested Memory List published in the Intel
®
Server Configurator Tool.
Table 4. UDIMM Support Guidelines (Preliminary. Subject to Change)
Ranks
Per
DIMM
and
Data
Width
Memory Capacity Per
DIMM1
Speed (MT/s) and Voltage Validated by
Slot per Channel (SPC) and DIMM Per Channel (DPC)2,3
1 Slot per Channel
2 Slots per Channel
1DPC
1DPC
2DPC
1.35V
1.5V
1.35V
1.5V
1.35V
1.5V
SRx8
Non-
ECC
1GB
2GB
4GB
n/a
1066,
1333, 1600
n/a
1066, 1333
n/a
1066, 1333
DRx8
Non-
ECC
2GB
4GB
8GB
n/a
1066,
1333, 1600
n/a
1066, 1333
n/a
1066, 1333
SRx16
Non-
ECC
512MB
1GB
2GB
n/a
1066,
1333, 1600
n/a
1066, 1333
n/a
1066, 1333
SRx8
ECC
1GB
2GB
4GB
1066, 1333
1066,
1333, 1600
1066
1066, 1333
1066
1066, 1333
DRx8
ECC
2GB
4GB
8GB
1066, 1333
1066,
1333, 1600
1066
1066, 1333
1066
1066, 1333
Notes:
1. Supported DRAM Densities are 1Gb, 2Gb, and 4Gb. Only 2Gb and 4Gb are validated by Intel
®
2. Command Address Timing is 1N for 1DPC and 2N for 2DPC
3. No Support for 3DPC when using UDIMMs
Supported and Validated
Supported but not Validate