Filter
Top Products
Installing and Replacing Mobile Board Components
41
Installing a Modem
To install a Mobile Daughter Card (MDC) modem-only card on the Mobile Board, see
Figure 12 and follow these steps:
1. Observe the
precautions in "Before You Begin" on page 35.
2. Insert the b
lack connector (Figure 12, B) on the modem cable into the connector
on the modem card. These connectors are keyed and will fit only one way.
3. Insert the white connector (Figure 12, C) on the modem cable into the connector
on the Mobile Board. These connectors are keyed and will fit only one way.
4. Align the connector on the bottom of the modem card with the matching MDC
connector (Figure 12, D) on the Mobile Board and sec
ure the modem card to the
Mobile Board with two screws (Figure 12, E) as shown.
Figure 12. Installing a Modem