Filter
Top Products
Installing and Replacing Mobile Board Components
55
Installing the Keyboard Cover
To install the keyboard cover (Figure 23, A), see Figure 23 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 35.
2. In
sert the two tabs (Figure 23, B) on the front edge of
the keyboard cover into the
corresponding slots (Figure 23, C) in the C-tray (make sure that the keyboard is
attached
under the keyboard cover) and rotate the cover downward until it snaps
into place.
3. Close the lid and turn the chassis over. Secure the keyboard cover with two
screws (Figure 23, D) through the battery bra
cket as shown in the figure.
Figure 23. Installing a Keyboard Cover