Filter
Top Products
Installing and Replacing Mobile Board Components
53
Installing a Hard Disk Drive
To install a hard disk drive in the chassis, see Figure 21 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 35.
2. Attach
the disk drive mounting bracket (Figure 21, A) to the hard disk drive
(Figure 21, B) with four screws (Figure 21, C) as shown.
3. Insert the hard disk drive/bracket assembly
into the disk drive bay (Figure 21, E)
and enga
ge the Mobile Board connector. You can use the pull tab (Figure 21, D) to
f
acilitate installation.
Figure 21. Installing a Hard Disk Drive